Not much is known about the company Timer Line Hawk. So this is as much of a history as I could gather. The registered agent of the company was John A. Mc Gerty and the filing date was March 29,1983. It was a company formed initially by four men to take over the assets of the old Armalite company when they closed their doors. Initially they did the warranty work for Armalite on the AR-180 and 18. What is not generally known is that they also design and built guns other than the AR180 series rifles. This article is about such a rifle. This is the 2 shot rotating barrel 22lr survival rifle.
There are a few draw backs to this rifle. The first is that the point of aim is different for the two barrels. The second is that you have to be careful when loading as it is easy to get the cartridge not properly placed to allow the action to close.
The side of the rear barrel support. You can see the pins that pinned in the barrels to the support.
The barrel release latch on the bottom of the frame.
Looking at the end you can see the machined area for the extractor.
The barrels are actually AR-7 barrel liners.
The retaining notch is cut in behind the made in USA. Looking at the machining of this notch you can see that these were prototype weapons only.
An interesting logo used by Timberline Hawk.
The storage tube that was also the stock. To be used to store survival items.
The rubber cap that acted as a butt plate
The rifle taken apart and next to it’s storage bag.
As it would be stored in the back pack.
This is a limited prototype weapon that I don’t think ever went into serious production. The number on this rifle is 42 and it is the only one that I have ever seen or heard about. There were a few spare barrels assemblies made, I have one in my collection.
This rifle came out during a time period when small light weight survival rifles were all the rage.
I want to thank Pete, a friend of Gun Lab, for letting me photograph his very rare rifle.
Weapons man has an interesting write up on the original derringer that was the initial idea for this rifle here.
http://weaponsman.com/?p=34197